HOMEPAGE | THE WORLD OF FREE PACKET RADIO SOFTWARE AMSTERDAM THE NETHERLANDS |
Subject: Expanded RX And TX For The ADI AT-200 Range 130-173.995 MHz Date: 06 Oct 1995 STEP 01 While pressing the Function button (F), turn the radio on. Display will show all figures. Release the (F) button and it will read 145.00. STEP 02 Turn power off. STEP 03 Press 3 while turning power back on. Display will read 145.00 again. STEP 04 Press F and 3. Display will read 10. Change STEP to 05 by turning dial one click. STEP 05 Press F and 9. Display reads 00.60. We are now going to change it to 30.63 [50]. STEP 06 While pressing the F button, rotate the dial knob about 10 clicks counterclockwise until the display reads 30.60. Release the F button. Rotate the dial clockwise about 7 clicks until the display reads 30.63[50]. STEP 07 Press F and 3 and change STEP back to 10. STEP 08 Press F and 0. Display reads 145.00. STEP 09 Press 7. Display reads period. STEP 10 Press the numbers 3 0 6 3. STEP 11 And Press *. Display reads 130.00. STEP 12 Press F and 9. Display reads 30.63[50]. Hold the F button and turn the dial clockwise about 10 clicks until display reads 00.63[50]. STEP 13 Release F button. Turn dial CCW until it reads 00.60. STEP 14 Press *. Display reads 130.00. STEP 15 Turn the radio off and then back on again. This restores the keyboard direct frequency entry feature. The modification is now complete. The radio will now receive and transmit from 130.00 to 163.995. Hint: Use the F and MHz buttons to make large frequency changes. |