Subject: Re:Mods for Standard 5718 In article gj6McCarthy) writes:1 Remove 4 screws and lift the top cover (the top cover is the one with the "TWIN BANDER"
imprint.) 2 With the heatsink facing you, locate the vertical circuit board at the front of the C5718DA 3.
Locate the row of three blue chip resistors at the lower right corner of the vertical circuit board, to the
right of the connector labelled "CTD" Remove the blue chip resistor that is closest to the main circuit
board 4 Replace the cover, and preform the ALL RESET procedure described in the owners manual The C5718DA
is now configured for wide transmit.
Source QRZ: The Windows Ham Radio CDROM |
