From: wa2ise
Subject: DR110 mod file Keywords:mods Date: 3 Jul 91
00:21:52 GMT Organization: AT&T Bell Laboratories Lines:20 copied from packet:>
From: "CARTY ELLIS (KA2Y)"
Subject: ALINCO DR-110T MODS To broadband the DR-110T, while holding the "F" and "VFO/M" keys down, turn off
the power and then turn it back on (still holding the keys) The radio now has factory programming reset -
you just lost your memories but at least mine now transmits and receives from 130 Mhz to 169 Mhz Before you
do this, remove the top cover - notice the long (2 inchish) loop of yellow wire coming off the back of the
front panel - clip it! NOW - after resetting the microprocessor - press the "F" key, then press the "Mhz" key
(mine now says 370) press the "f" key again, then press the "Mhz" key again - (mine now says 870!) Mine
will scan from 870.000 to 889.995 Mhz I selected a 15Khz step because the channel spacing in this range is
30 Khz Toggle the "F" and "Mhz" keys and you're back at 144 mhz Enjoy.
--------------------------------------------- Note:I haven't tried or verified
this, proceed at your own risk WA2ISE
Source QRZ: The Windows Ham Radio CDROM
Source QRZ: The Windows Ham Radio CDROM |
