From: wa2ise
Subject: DR599t extended
RX mod file Keywords:mods Message-ID:
<1992mar1.195256.18027Date: 1 Mar 92 19:52:56 GMT Sender: newsfrom packet:Msg# TSF Size #Rd Date Time From MsgID To 18491 BF 1577 2 29-Feb 2230 KB3ZS 634_WA3NWL ALL() Sb:alinco dr599t owners Hello out there dr599t owners Have some interesting info about the rig If you
take off the removeable front panel and remove the two phillips screws holding the front panel together, you
will find two junper wires (one red, the other blue) Cut both jumpers and reset (funct + power) Remember to
write down all your memories You will find that the radio will recieve on 108.00 to 142.990 AM on the vhf
side and 850.000 to 909.9875 on the uhf side To activate the (EXTRA OPTIONS), just press the VHF and also
the UHF BAND buttons twice With each press, you will activate either the normal or the EXPANDED band
capabilities of the radio It's nice when a Ham creates a rig to do things for other Hams Look Ma, no
special wiring or soldering to do just cut some jumpers and away you go Just remember, no transmitter
operations on frequencies you are not allowed! For the complete file, check into the Langhorne Connection BBS
via 2400 or less via phone line Other Ham information is available on this BBS The number to call is
215-322-2133 weekday evenings 6pm to 6am (local) and all weekend long.
======================================================================== Note:I haven't tried or verified
this, proceed at your own risk And Do Not transmit outside of legal bands! WA2ISE Copied from QRZ, The
Windows Ham Radio CDROM
Source QRZ: The Windows Ham Radio CDROM |
