Here Can You Find The Ham Radio Modifications
HOMEPAGE THE WORLD OF FREE PACKET RADIO SOFTWARE AMSTERDAM THE NETHERLANDS


THE WORLD OF FREE PACKET RADIO SOFTWARE IN AMSTERDAM

HERE CAN YOU FIND THE HAM RADIO MODIFICATIONS




FT5200.2



copied from the Internet:

Newsgroups: rec.radio.amateur.equipment

From: skroner.
Subject: FT5200 Extended Freq Mod



FT-5200 / Frequency Expansion



Remove all power to the unit.



Remove the control head and set it aside. (never open it!)



Remove 12 screws that hold on the top and bottom covers.



Remove the 2 silver screws that hold the control head mounting plate.



Remove the plate.



Locate and solder jumper pads 1,3,6.



Put the radio back together completely.



Reconnect the power to the radio.



Press and hold (D/MR) (F/W) (REV) together and turn the power on.



(you should now see:000.000 & 300.00 on the display).



Select VHF range

        select 118.00 Mhz press (D/MR) button (VHF rx low limit)

        select 174.00 Mhz press (D/MR) button (VHF rx high limit)



        select 140.00 Mhz press (D/MR) button (VHF tx low limit)

        select 150.00 Mhz press (D/MR) button (VHF tx high limit)



        **************************************************************



Select UHF range



        select 420.00 Mhz press (D/MR) button (UHF rx low limit)

        select 475.00 Mhz press (D/MR) button (UHF rx high limit)



        select 420.00 Mhz press (D/MR) button (UHF tx low limit)

        select 450.00 Mhz press (D/MR) button (UHF tx high limit)



You might have to install your repeater splits again after the mod.

(you might try to add more frequencies to the UHF rx high limit, rec.

around 471.00 Mhz is really lousy, but some receivers get better after

they hit a certain low, so this radio might get

800 Mhz, give it a try... Enjoy!



******** REMEMBER DO NOT OPEN THE CONTROL HEAD!!!!







Subject: FT5200 X-Band Mod

Subject:  FT-5200 Cross Band Repeat Modifications





Remove all power to the unit.



Remove the control head and set it aside. (never open it!)



Remove 12 screws that hold on the top and bottom covers.



Remove the 2 silver screws that hold the control head mounting plate.



Remove the plate.



you will see jumper pads on the circuit board, remove the jumper from

# 17 (it is just to the right of #19) this enables cross band repeat.



Reassemble the radio.





******** REMEMBER DO NOT OPEN THE CONTROL HEAD!!!!



To activate:hold rept button while turning on radio



Stu Kroner

73 de N1JEF
skroner


SOURCE: The QRZ Windows Ham Radio CDROM



www.alwaysfree.nl - Web Reputation








Free Backlinks, Get 500 Free Backlinks Automatic Creation.

GET NOW 500 FREE BACKLINK AUTOMATIC




Do you need targeted visitors, get now 200 free visitors.

DO YOU NEED TARGETED VISITORS TO YOUR WEBSITE, GET NOW 200 FREE VISITORS




2 GB Storage That You Get At Free Web Hosting From www.hostinger.co.uk

FREE WEBSITE HOSTING IN UK WITH PHP AND MYSQL, WEBSITE BUILDER, NO ADS




Submit Here Your Website To The Web's Top 50 From Search Engines for Free

SUBMIT YOUR WEBSITE TO THE TOP 50 OF THE BEST SEARCH ENGINES FOR FREE




The World of Free Packet Radio Software Amsterdam
The World of Free Packet Radio Software Amsterdam The Netherlands

The World of Free Packet Radio Software Amsterdam The Netherlands - All Rights Reserved