Newsgroups: rec.radio.info
From: wa2ise
Subject: ft890 mod file
Message-ID: <1993Jan24.005316.5410
Keywords:mods
Sender: news
Organization: AT&T
Date: Sun, 24 Jan 1993 00:53:16 GMT
Approved:wa2ise
Lines:34
copied from packet:
Msg# Size #Rd Date Time From MsgID To
32972 BF 2276 0 13-Jan 1142 F1LOU 30527_ON7RC YAESU
Sb:FT890 MODS
YAESU FT890/AT mod. TX 1,5 to 30 MHZ.
======================================
- Disconnect FT890 from all connections.
- Open tranceiver like explained in your "OPERATING MANUAL".
- Locate on the "CONTROL UNIT" jumper point JW 3001 and close it with solder.
- Close tranceiver back and reconnect power.
- Push PROC, AGC-F, IPO, ATT while power ON.
- Now the display shows two digits of numbers and tree of letters (i.e 13 OFF)
Rotate main knob and set the display to "02 ON". Now press the PROC button.
- Power OFF and then back ON. It's all!
- Now every time you want, you can change the programation, but you will
allways lose the memories.
- Other settings than "02 ON" are of no interest. This one give you 100 w
and automatic antenna tuning between 1,5 and 30 mhz.
73's de Phil, F1LOU
=========================================================================
Note:I haven't tried or verified this, proceed at your own risk, and
do not transmit outside of legal bands! WA2ISE
SOURCE: The QRZ Windows Ham Radio CDROM |
