From: NFXQ96A
Date: Sat, 31 Jan 1998 22:25:46, -0500
To: editor
Subject: Mars/Cap mod for Kenwood TM-V7A
Remove the top and bottom covers and the detachable
face holder. Look at the p c board that is vertical behind
the front of the radio. There will be 2 small chip resistors
on the left side of the board. Carefully remove the one
with the number 0 . It will be the one closest to the left
near the grounding spring. You will probably have to scrape it off
with a pair of needle nose pliers. After you remove it
the TX should be VHF TX 136.995 - 173.995. RX should
be 118-174. UHF TX should be 410-469.995 RX should be
300-470.
---------------------------------------------------------
From: "Bowyer, Mike J"
SOURCE: The QRZ Windows Ham Radio CDROM |
