Subject: TR-2600 extended xmit
Here is some info on the kenwood model tr-2600a handie - talkie....
if you want to be able to transmit on the extended freq area then do
the following mod....
1. remove the front cover of the radio
2. locate the ic chip in the lower right hand corner.
3. find the 2 diodes number d32 and d33 (they should be the top two on
the right side of the ic chip, also they have ben cut beforenand
(re-soldered)
4. un-solder the two diodes (breaking their connection).
5. replace the front ctver.
6. re-install the battery and turn the unit on, then push the reset
button on the back.
the tr-2600a should now be reprogramed and it should also transmit
anywhere it will recieve...
i forgot to add that d32 and d33 on the recieve board (but that is
what is under the front cover).
this is the mod as per kenwood....
hope you like it....
jim - kd0pj RELAYED BY...N0KGX...GENE
SOURCE: The QRZ Windows Ham Radio CDROM |
