Newsgroups: rec.radio.amateur.misc
From: keithm
Subject: Mod for Kenwood TW-4000 for CAP
Message-ID: <1992Nov6.173126.8068
Summary:CAP mod for Kenwood TW-4000
Keywords:mod, tw-4000
Organization: WICAT Systems
Date: Fri, 6 Nov 1992 17:31:26 GMT
Lines:20
I tried to e-mail the gent who needed the mod for the Kenwood
TW-4000 for CAP for his friend. I bounced with unknown host.
Since mods are fairly general interest anyway, I decided to
just post it.
------------------------------
On the back of the CPU assembly, (part of the front panel assembly),
there is a wire jumper (sort of a loop of wire between two pads on
the board). If you clip this wire, and reset the CPU, the '4000
will RX-TX from 141.0 Mhz to 150.995 Mhz. There is no change on
UHF.
Let me know if this helps.
--
Keith McQueen, Wicat Systems Inc. , (801)224-6400 | My opinions are |
Packet: n7hmf
Internet: keithm
SOURCE: The QRZ Windows Ham Radio CDROM |
